Pony 2000 Stilt

Self propelled, multipurpose, multifunctional

 

 

Straddle propelled Model 2000 PONY, versatile and multifunctional tool holder is a hydrostatic traction with variable track, but mechanical.

 

 

 

 

Fully customizable, it works on inter rows of fruit and vineyard nurseries.

Its lifter can mount different equipment that perform a variety of operations.

 

 

 

Machine configuration:

Technical features

The PONY 2000  is developed on a three-wheeled chassis, with a rear track (1) that can be customized according to the inter-row: from a minimum of 0.8 meters to over a meter.

In height the available light (2) is 1.8 meters (with lifter raised).

The overall dimensions are: 215×400xH250 cm

All the movements of the Pony 2000 , including the hydrostatic motors (3) that give movement to the machine, are managed by the hydraulic system powered by the 33 HP liquid-cooled 4-cylinder Lombardini engine (4).

The control station (5) offers the operator maximum visibility on the work area.

The control station consists of:

6) Ergonomic seat, equipped with an electrical safety sensor, which turns off the engine if the operator should move away from the control station.

7) Hydraulic guide (tilting to pre-set the operator’s ascent)

8) Feed lever

9) Cloche main commands (movement of the tool bar and service commands).

10) Engine panel:

– Tachometer

– Fuel level

– Water temperature

– Headlights

– Speedometer

– Battery lock

– Automatic guide

 

11) Service panel:

– Liters meter pannel produced by treatments

– Manometer pressure product for treatments

– Product pressure regulation for treatments

– Bar and service socket activation

12) Rear-view mirrors

13) Working lights / rear position lights

14) Protection roof

15) Automatic guide probe unit

16) Rear lift

Parallelogram structure, moved hydraulically, performs a vertical excursion of 1 mt.

Equipped with 2 anchoring solutions (17), used depending on the equipment installed.

The rear compartment (18) is designed to accommodate and support different equipment.

The Pony 2000 is equipped with an independent hydraulic system and is equipped with:

 

19) Hydraulic feeding services outlet

20) Power supply services outlet

21) Electrical socket 12 Volt

 

The connections between the machine and the equipment are mechanical and hydraulic.

To facilitate connections, the grafts are of the same color.

Equipment applicable to the machine

22) Transporter Group

It is a structure (23) applied mechanically to the lift, made up of fixed and tilting crosspieces that mount 5 seats (23A) that can rotate on themselves and with a 1 m height excursion, thanks to the hydraulic lift.

Operators perform, in all comfort, a series of operations on plants:

– Pruning *

– Suckering *

– Grafting

*22A) Compressor Group

Pneumatic equipment for pruning and suckering, consisting of two components:

22B) Compressor, 400 lt with 200 lt tank, driven by a hydraulic motor.

22C) Pneumatic shears, with tubes

and built-in pressure switch.

It rests on a mobile structure (22D), equipped with pivoting wheels adjustable in height for the release of the group and to park it when the equipment is not used.

Once the equipment is attached to the machine, the pivoting wheels are removed.

Bamboo canes Accessory

To facilitate the tying of the bamboo canes in support of the plants, we have special baskets (24), placed in place of the seats, where we load the bundles of cane (the operator follows the machineon foot).

25) Treatment Bar Equipment

Electro-hydraulic equipment consisting of two distinct components:

26) Atomizer

27) Treatment Bar

It rests on a mobile structure (28), equipped with pivoting adjustable wheels for the release of the group and to park it when the equipment is not used.

Once the equipment is attached to the machine, the pivoting wheels are removed.

Treatment Bar Equipment

Atomizer

Electro / hydraulic system for the nebulization of treatment products.

It mounts a proper system that works by connecting to the electro / hydraulic system of the machine.

Consisting of:

30) Cistern.

31) System washing tank.

32) Hand-washing tank.

33) Product level indicator.

34) Plumbing / electrical system

Treatment Bar Equipment

Treatment bar

It supports the product distribution system.

Consisting of:

35) Galvanized metallic structure with fixed and movable tubulars, with hydraulic uprights for riser of 1,8 mt.

36) N ° 24 jets spray product of the TRIJET type, inclusive of anti-drop.

On each of the 8 rows (with variable distance from 0.8 to 1m), 3 jets are arranged.

We can hydraulically:

37) Change the working height (1.8 meters).

38) Fold the outer arms for the bulk during transport.

N.B. all operations are managed from the command post.

39) Localized Weed Equipment

Electro-hydraulic equipment consisting of two distinct components:

40) Atomizer

41) Localized weeding bar

It rests on a mobile structure (42), equipped with pivoting adjustable wheels for the release of the group and to park it when the equipment is not used.

Once the equipment is attached to the machine, the pivoting wheels are removed.

Localized Weed Equipment

Atomizer

 

Electro / hydraulic system for the nebulization of treatment products.

It mounts a proper system that works by connecting to the electro / hydraulic system of the machine.

 

Consisting of:

43) Cistern.

44) System washing tank.

45) Hand-washing tank.

46) Product level indicator.

47) Plumbing / electrical system

Localized Weed Equipment

Localized weeding bar

It supports the product distribution system.

Consisting of:

48) Galvanized metallic structure with fixed and movable tubulars, with hydraulic uprights for riser of 1,8 mt.

49) Element for localized weeding, formed by a parallelogram with springs,

where the locator accessory is anchored, consisting of a plafon where two jets of the TRIJET type are included, including anti-drop (50).

The jets deliver the product in a specific area, thanks to a brush

perimeter of nylon bristles, which takes the form of the plafon.

When not used, 2 articulated support wheels allow the parking of the single element.

N.B. The element for localized weeding is constructed in useful working dimensions (51)We can hydraulically:

52) Varying the working height (1.8 m)

53) Fold the outer arms for the bulk during transport.

N.B. all operations are managed from the command post.

54) Promalin treatment Equipment

Electro-hydraulic equipment consisting of two distinct components:

 55) Atomizer

 56) Transporter Equipment set up with lance sprays product

It rests on a mobile structure (57), equipped with adjustable pivoting wheels for the release of the unit and to park it when the equipment is not used.

Once the equipment is attached to the machine, the pivoting wheels are removed.

Promalin treatment Equipment

Atomizer

Electro / hydraulic system for Promalin propagation

It mounts a proper system that works by connecting to the electro / hydraulic system of the machine.

Consisting of:

58) Cistern produced from 300-400 lt

59) Hydraulic / electric system with pump

100 lt for dosing coverage of 5 lances.

60) Quick coupling lance hooks

61) Handwash tank.

Transporter group set up with lance sprays product.

It is a Transporter (62) type structure, mechanically applied to the lift, made up of fixed and tilting crosspieces that mount 5 lance spears and sprays (63).

The operators perform the treatments using the appropriate lances.

N.B. the dosage of the product is carried out by the operator on the command station.

64) Weeding Equipment

It is a mechanical equipment, consisting of a crosspiece (65) anchored directly to the lift, where a series of applications dedicated to precision weeding are mounted.

In this case the Rotoblizz application (66), which acts directly on the transplant row without damaging the root and leaf apparatus, uprooting the weeds and thus reducing the need for chemical herbicides.

 

Application arrangement:

67) Rotoblizz application

Use one or more individual elements, for one or more files. Flexible, fully adjustable with a single register key.

The single element consists of:

68) Parallelogram with prefixed variable load springs (A), with adjustment by means of a handle.

Parallelogram with springs with variable free load (B), with crank adjustment.

69) Element holder structure, supports the basic equipment and options.

70) Vomerine kit with variable size hoes.

71) Ridger

General technical data

  • Self-moving height (H): 2015 mm
  • Max height with equipment (H1): 3000 mm
  • Self-propelled width (L): 2000 mm
  • Width with equipment (L1): 7500 mm
  • Depth (P): 4000 mm
  • Self-propelled mass: 700 Kg
  • Self-propelled mass + equipment: 1000 Kg
  • Tire pressure: 2.2 bar
  • Hydraulic oil tank capacity (A): 50 lt
  • Fuel tank capacity (B): 30 lt
  • Battery: 12V / 60A
  • Painting: red “RAL 2200”
  • Maximum speed: 6 Km / h
  • Maximum slope that can be overcome both uphill and in downhill: 5%
  • Maximum lateral inclination, in conditions of evenly distributed masses: 4%

Optional

Options list

72) Fertilizer Distributor

Plant that allows to administer fertilizer fertilizer.

It can work alone or combined with the Rotoblizz application.

Mechanically anchored to the lift.

73) Accessorio per trasporto su strada

Photo - Machine and processing:

Video - Machine and processing: